SERIES DARWIN PLUS SGB FOR OE
DARWIN PLUS hoses based on EPDM, AEM, NBR & HNBR rubber used for original equipments/industrial equipments (OE) of terrain vehicles and agricultural machinery manufactured by Russian and foreign companies:
Our design department with highly qualified specialists creates in the shortest possible time a production development and preparation project, including the design of hoses, selection and creation of rubber compounds that fully comply with the customer’s technical requirements and standards for the production of the desired product.
DARWIN PLUS SGB series hoses made of compound based on EPDM, AEM, NBR and HNBR rubbers are manufactured in accordance with
TC SGBH 1801 & TC SGFOH 1801 (Technical specifications of the Shreegee for black and oil-resistant hoses as well as technical specifications and design documentation agreed with the customer.
Application:
For trucks, buses and tractors. In the cooling system, heating & supply systems.
The hoses are intended for the OE of trucks, buses and agricultural machinery. The hoses are used in the radiator, intercooler (CAC), cooling and heating system, gas exhaust system (in the air filter), in the exhaust gas neutralizer, in the engine, in the crankcase ventilation system, in the supply system (fuel pipes, exhaust pipes and charge air systems).
Specification:
- Working medium: coolant, hot air, air, exhaust fumes, oils, gasoline and
- Burst pressure pb: 3 x Working
- t working from -50 °C to +150 °C.
- Reinforcement:
1. Polyester thread
2. Meta Aramid thread
3. Cotton thread - Surface:
1. Gloss finish
2. Matt finish.
| Material: Compound based EPDM, AEM, NBR & HNBR rubbers. | |
| EPDM based compoud | for a temperature range from -50 to 120/150°C |
| AEM based compoud | for a temperature range from -40 to 150°C |
| NBR based compoud | for a temperature range from -40 to 120°C |
| HNBR based compoud | for a temperature range from -45 to 160°C |
DARWIN PLUS - Trademark
SGB 01- Hose number for OE
DPL - Type of hose
- DPL - Angle hose
- DPS - Hose with more than one bend
- DPI - Straight hose
X’EPDM - material marking
- X’EPDM - EPDM based compound for temperature upto 120/150°C;
- X’AOR - AEM based compound for temperature upto 150°C;
- X’NBR - NBR based compound for temperature upto 120°C;
- X’HNBR - HNBR based compound for temperature upto 160°C;
*After the verification of the drawing with the number / name of the hose from the customer, the product is marked in accordance verified drawing
Gallery
The message has been sent