RUBBER & SILICONE MOLDED AND INJECTION MOLDED PARTS DARWIN PLUS
Our design department with highly qualified specialists can create in the shortest time possible a molding tool project and a mold for a press die that fully complies with the set tasks and standards and develop a technology for the production of the required goods.
Type of rubber EDPM, AEM,NBR and silicone DARWIN PLUS molded parts: seals, jackets, gaskets, fasteners, gaskets, vibration isolators, shock absorbers and molded parts and molded hoses.
Advantages of molded hoses :
- Precise hose shape guarantees excellent tightness & hermeticity;
- Resistant to heat, ozone , ultraviolet and chemical coolants; Braided synthetic thread reinforcement;
- The maximum working pressure of casted /molded hoses with an inner diameter of up to 40 mm is 0.4 MPa, for hoses with an inner diameter of more than 40 mm - 0.3 MPa;
Our molded parts are manufactured in accordance with ASTM D2000 (Standard Classification System for Rubber Products in Automotive Applications);
TC SGH RM 1802 (ShreeGee factory standard for rubber molded parts)
Characteristics of the part according to the agreed TC and the drawing with the customer.
Design
Material: Vulcanized rubber compound EPDM, AEM, NBR, HNBR or silicone rubber
Color: Black, Red, Blue and Orange. Special version: Transparent and green.
Specification: according to the drawing. Hardness 50-80 shA
| RUBBER COMPOUND BASE | WORKING MEDIUM* | WORKING TEMPERATURE* |
| AEM | Oils, air with oil vapors | From -45 °C to +150 °C (for short duration up to +175 °C) |
| NBR | Engine oils, mineral oils, petroleum oils and fuels. | From -40 °C to +100 °C (for short duration up to +120 °C) |
| HNBR | Diesel fuel, gasoline and petroleum oils and greases. | from -45 °C to +150 °C |
| VMQ | Air, air with oil vapors and coolant | Blue compound for the temperature range from -50 to 130 °C Red compound for the temperature range from -50 to 200 °C Orange compound for the temperature range from -50 to 250 °C Black oil-fuel resistant compound for the temperature range from -50 to 130 °C |
| FS | Fuel, diesel and oil | from -45 °C to +150 °C (for short duration up to +160 °C) |
| FKM | Fuel, diesel and oil | from -25 °C to +250 °C (for short duration up to +300 °C) |
DARWIN PLUS molded parts are manufactured from the rubber as per ASTM D2000
The material properties of oil-petrol resistant rubbers are presented for reference only.
For the precise selection of Material, please contact our specialists info@ shreegeeimpex.com
Reference Information. The final composition of the compound is selected on the basis of the customer’s specifications, standard tests are carried out. Test reports are provided along with samples of prototypes & finished products. After the verification of the drawing with the number / name of the hose from the customer, the product is marked in accordance verified drawing.
Gallery
The message has been sent